Yeah, it works.
# df -h
Filesystem size used avail capacity Mounted on
/dev/dsk/c0d0s0 7.9G 3.3G 4.5G 43% /
/devices 0K 0K 0K 0% /devices
ctfs 0K 0K 0K 0% /system/contract
proc 0K 0K 0K 0% /proc
mnttab 0K 0K 0K 0% /etc/mnttab
swap 15G 896K 15G 1% /etc/svc/volatile
objfs 0K 0K 0K 0% /system/object
7.9G 3.3G 4.5G 43% /lib/libc.so.1
fd 0K 0K 0K 0% /dev/fd
swap 15G 112K 15G 1% /tmp
swap 15G 32K 15G 1% /var/run
/dev/dsk/c0d0s3 3.9G 4.0M 3.9G 1% /small/home
/dev/dsk/c0d0s7 394G 65M 390G 1% /export/home
tank 9.4T 24K 9.4T 1% /tank
tank/big 9.4T 24K 9.4T 1% /export/big
NAME USED AVAIL REFER MOUNTPOINT
tank 120K 9.35T 24.5K /tank
tank/big 24.5K 9.35T 24.5K /export/big
Looking for some benchmark tools now. Installation was ok, though I thought that the crash after the driver installation was, well, an interesting turn.
But it works, so I won’t complain too much.
smc was a pleasure. Well, no. First time it took 30 minutes before I decided to reboot the box (after the driver install crash). Then after that, in shades of a Redhat-ism, it refused to correctly label the drive. The drive demanded an EFI label. smc wasn’t able to do that (wasn’t obvious after poking at it). Had to do it by hand with format -e. And that still didn’t work. Gave up, googled for creating a zfs file system. WAAAYYY too much marketing drivel on zfs. WAAAYYY too many fan-boi’s out there. WAAAYY too little useful information. This one was helpful, as was this.
Now I am seeking out compilers so I can build bonnie++ and IOzone among others.